Muxlab CCTV IP PoE Extender 2-Pack User Manual

Browse online or download User Manual for Accessories for electrical Muxlab CCTV IP PoE Extender 2-Pack. Muxlab CCTV IP PoE Extender 2-Pack User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
© MuxLab Inc. 94-000720-B
8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: videoease
@
muxlab.co
m
URL: www.muxlab.co
m
Specifications
Environment
PoE CCTV IP
Devices
PoE CCTV IP cameras with a 10/100Mb/s Ethernet port, using up to 14
Watts.
Standard supported
Ethernet side:
IEEE 802.3 10BaseT,
IEEE 802.3U 100Base-TX
IEEE 802.3af compatible PoE
Maximum distance vs.
speed between unit
10 Mbps at 7W with good RG59: 1600ft (500m)
10 Mbps at 14W with good RG59: 1000ft(300m)
100 Mbps at 14W: 330ft (100m)
The maximum distance will vary depending on the coax cable.
Cable between unit
Coax 75 ohm RG59/RG6 or better. (avoid CCS cable)
Cable for Ethernet port
(Not included)
Two CAT 5/5e/6 UTP cables are required (straight), up to 10ft(3m).
Indicator
Power present.
Ethernet connector
One RJ45S.
Connector to connect
the two units
BNC 75 ohms
PoE Mode Switch
Manual switch selects between PoE Mode A or Mode B
Mode A: Most PoE switches
Mode B: Most PoE injectors
Power consumption
0.5 Watts, from the PoE. No external supply required.
Temperature
Operating: 0° to 60°C Storage: -55° to 85°C
Humidity: Up to 95% non-condensing
Enclosure
Plastic
Dimensions
2.40” x 2.25” x 1.00” (6.1 x 5.7 x 2.54 cm)
Weight
0.15 lb. (70 g)
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
2 years
Ordering information
500111 CCTV IP PoE Extender.
CCTV-IP PoE Extender
500111
Quick Installation Guide
Overview
The CCTV IP PoE Extender (500111) allows one IP camera (7 Watts) to be connected
up to 1600 ft (500 m) via a single 75-ohm coax cable in a point-to-point configuration.
The product works in pairs and the power consumption is low enough so that it does not
load the PoE source or switch. The maximum distance depends on the grade of coax
cable and the power consumption of the camera.
Applications
CCTV IP surveillance
Ethernet inter-connections
Page view 0
1 2

Summary of Contents

Page 1 - Applications

© MuxLab Inc. 94-000720-B8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877)

Page 2 - Troubleshooting

© MuxLab Inc. 2012InstallationOne (1) pair of extenders is needed to complete one PoE IP connection via coaxial cable. Toinstall the extenders, perfor

Comments to this Manuals

No comments