Muxlab LongReach 3G-SDI to HDMI Extender Kit User Manual download pdf

8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

mail:

[email protected]

URL:

www.muxlab.com

Specifications

Environment

SDI single link: SD, HD & 3G.

Devices Monitors supporting the original SDI rate only.

Standard supported

SMPTE 259M (270Mb/s), SMPTE 292M & SMPTE 424M.

Bit rates

270Mb/s, 1.485Gb/s & 2.97 Gb/s (automatic selection).

Video format supported

(monitor must support the

original SDI rate)

SD: 525i, 59.94/60Hz & 625i, 50Hz

HD: 720p @ 60Hz, 50Hz, 30Hz, 25Hz & 24Hz

1080i @ 60Hz & 50Hz

1080p @ 30Hz, 25Hz & 24Hz

3G: 1080p @ 60Hz & 50Hz

Sound format

supported

48kHz @ 24 bit, 20 bit & 16 bit.

Indicators

Power

SDI Sync (on rx side only)

RJ45 Sync

Video (on tx side only)

Sound (on tx side only)

HDMI Sync (on rx side only)

Connectors

On each unit

One BNC 75 ohm female on source side.

One HDMI on receiver on receiver side

One RJ45S for Cat5e/6 unshielded twisted pair.

One power connector, 2mm.

Maximum Distance

UTP Cat 5e: 330 ft (100 m) UTP Cat 6: 400 ft (122 m)

Maximum distance applies for all format and speed between boxes. On

SDI side: 450 ft (140m).

On HDMI side: 15 ft (5 m) typical.

RJ45 Pin Configuration

Use EIA/TIA 568A or

586B straight-through

wiring only.

RJ45 Link

Pin 1 (R) Pin 2 (T)

Pin 3 (R) Pin 6 (T)

Pin 4 (R) Pin 5 (T)

Pin 7 (R) Pin 8 (T)

Cables

(Not included)

One straight Cat 5e/6 twisted pair cables required.

One 75 ohm coaxial cables with 75 ohm BNC required.

One HDMI cable.

Power Supply

(Included)

Two 100-240V/5VDC 6W power supplies with interchangeable blades

for NA, Europe and UK.

Power Consumption

Transmitter: 4 Watts Receiver: 6 Watts

Temperature

Operating: 0° to 40°C Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Enclosure

6061 Aluminum alloy

Dimensions

4.50” x 3.00” x 1.25” (11.4 x 7.6 x 3.2 cm)

Weight

2.5 lb. (1.1 kg)

Warranty

2 years

Order Information

500715 HD-SD to HDMI Extender Kit

HD-SDI to HDMI Extender Kit

500715

Quick Installation Guide

Overview

The HD-SDI to HDMI Extender Kit allows a HD-SDI source to be converted to a

HDMI signal and transmitted up to 330 ft (100m) via Cat5e cable in a point-to-point

configuration to a HDMI monitor. The kit supports transmission of up to 2.97/3.0 Gbps

uncompressed, digital video including digital sound within television facilities.

Applications

Applications include broadcast, commercial and residential AV systems, classroom

projector systems, digital signage, boardroom systems, and medical information

systems.

1 2

Summary of Contents

Page 1 - Specifications

Page 2 - Troubleshooting

Comments to this Manuals

No comments

Muxlab LongReach 3G-SDI to HDMI Extender Kit User Manual

Browse online or download User Manual for Accessories for electrical Muxlab LongReach 3G-SDI to HDMI Extender Kit. Muxlab LongReach 3G-SDI to HDMI Extender Kit User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for electrical Muxlab LongReach 3G-SDI to HDMI Extender Kit