Muxlab Stereo Hi-Fi Wall Balun, UK User Manual download pdf

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

E-mail: [email protected] URL: www.muxlab.com

Specifications

Environment

Line level unbalanced analogue audio

Devices

DVD players, satellite receivers, MPEG players, laptops, hi-

fidelity stereo audio amplifiers, audio switchers, AV monitors and

other line level audio equipment.

Transmission

Transparent to the user

3 dB Bandwidth

20 Hz to 20 kHz over the distance range

Maximum Input

1.1 Vp-p

Insertion Loss per Balun Pair

Less than 2 dB over the frequency range

Common Mode Rejection Ratio

(CMRR)

Greater than 60 dB at 1 kHz

Greater than 40 dB over the frequency range

THD

Less than 0.007% at 1 kHz

Audio Source Impedance

100 ohm maximum

Audio Receiver Impedance

10 kohm minimum

Max. Distance via

Cat 5E/6 UTP/STP Cable

3,250 ft (1.0 km)

Pin Configuration (RJ45)

Audio 1 (White): Pins 1(R) & 2(T)

Audio 2 (Red): Pins 3(R) & 6 (T)

Cable:

Cat 5E/6 UTP/STP

24 AWG or lower solid copper twisted pair wire

Impedance: 100 ohm at 1 MHz

Maximum capacitance: 20 pf/ft

Attenuation: 6.6 dB/1,000 ft at 1 MHz

Cable: Coax

Shielded audio cable

Connectors

Two (2) RCA-F

One (1) RJ45

Temperature

Operating: 0

to 55

Storage: -20

to 85

Humidity: Up to 95% non-condensing

Enclosure

ABS. Fire retardant plastic

Dimensions

86 mm x 86 mm x 36 mm. Choose 40 mm deep back box to

allow for Cat 5E/6 wiring connection.

Weight

3.5 oz. (100 g)

Warranty

Lifetime

Order Information

500028-WP-UK Stereo Hi-Fi Audio Wall Plate Balun

UPC: 6-27699-91028-3

Stereo Hi-Fi Audio Wall Balun

500028-WP-UK

Quick Installation Guide

Overview

The Stereo Hi-Fi Audio Wall Balun (500028-WP-UK) allows unbalanced line level stereo

audio to be transmitted up to 3,250 ft (1.0 km) via an unshielded copper twisted pair (UTP)

cable in a point-to-point connection. Used in pairs, or in conjunction with the 500028, the

product is designed for high fidelity applications where full audio bandwidth (20 Hz to

20 kHz) is required. Used in pairs, the Stereo Hi-Fi Audio Wall Balun eliminates costly and

bulky audio cables, allowing audio equipment to be connected or moved within a structured

cabling environment. Applications include; Audio distribution, high-fidelity sound systems,

and custom residential audio systems.

Installation

One (1) pair of baluns is needed to complete one stereo hi-fi audio connection via Cat 5E/6

twisted pair. To install the baluns, perform the following steps:

1. Identify the pin configuration of the baluns. Two (2) twisted

pairs are required as shown in the diagram to the right. The

pin configuration follows the EIA/TIA 568A/B standard. The

Stereo Hi-Fi Balun is reverse polarity sensitive. Please ensure

that wiring is straight-through (Ring to Ring, Tip to Tip).

1 2

Summary of Contents

Page 1 - Installation

Page 2 - Troubleshooting

Comments to this Manuals

No comments

Muxlab Stereo Hi-Fi Wall Balun, UK User Manual

Browse online or download User Manual for Accessories for electrical Muxlab Stereo Hi-Fi Wall Balun, UK. Muxlab Stereo Hi-Fi Wall Balun, UK User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for electrical Muxlab Stereo Hi-Fi Wall Balun, UK