Muxlab Rackmount Balun Chassis 6 User Manual download pdf

Specifications

Environment

Custom audio-video systems in a structured cabling environment.

Application

Head-end installations, audio-video rooms, telecom rooms.

Capacity

Six (6) positions.

Compatible baluns

MuxLab baluns measuring: 2.4” x 2.25” x 1” (6.1 x 5.7 x 2.5 cm).

Orientation

Baluns may be installed front or rear facing.

Snap-in mechanism

Baluns lock into position via spring latch mechanism.

Rack height

1U (1.75”).

Enclosure

Black painted steel.

Mounting holes

Four (4) rackmounting holes

Mounting hardware

Four (4) rackmounting 10-32 screws and washers are included.

Slot Id

Silkscreen on front and rear. Slots numbered “1” to “16”.

Dimensions

19” (W) x 1.75” (H) x 3.0” (D) (48 cm x 4.45 cm x 7.6 cm).

Weight

1.9 lbs (.86 kg).

Standards

EIA/TIA.

Warranty

Lifetime.

Order Information

500902 Rackmount Balun Chassis 6

8495 Dalton Road, Mount Royal, Quebec, Canada, H4T 1V5

Tel.: (+1) 514-905-0588 Fax: (+1) 514-905-0589

Toll Free (North America): (877) 689-5228

E-mail: [email protected] URL: www.muxlab.com

94-000657-A SE-000657-A

Rackmount Balun Chassis 6 (500902)

Installation Guide

Introduction

The Rackmount Balun Chassis 6 is designed as a head-end cable management

solution, allowing any combination of up to six (6) MuxLab square baluns to be

installed in a standard 19” telecom relay rack. Head-end AV equipment such as

DVD players, video servers and cable boxes may be installed in a local wiring

closet and connected to the Cat5E/6 structured cabling system via a wide array of

MuxLab balun solutions.

The baluns may be installed in either front or rear- facing orientation depending on

the application. At the display end, the appropriate MuxLab baluns are installed at

the receivers to support a fully Cat5E/6 cabling solution. Each balun snaps into

place and is held firmly by a spring latching mechanism. The product features a

rugged one-piece design for ease of installation and maintenance.

Installation

In order to install the Rackmount Balun Chassis 6 (500902), perform the following steps:

1. Identify the final location of the Rackmount Balun Chassis.

2. Install the Rackmount Balun Chassis in the 19” relay rack using the 10-32 rack

screws and nylon washers included with the product.

3. Install each balun in its appropriate slot. In order to install each balun, push the

balun into the desired slot from the rear of the Balun Chassis. The slots are

numbered “1” to “6”. Each balun snaps into place and is retained by a spring-steel

retaining clip.

1 2

Summary of Contents

Page 1 - Installation

Page 2

Comments to this Manuals

No comments

Muxlab Rackmount Balun Chassis 6 User Manual

Browse online or download User Manual for Accessories for video Muxlab Rackmount Balun Chassis 6. Muxlab Rackmount Balun Chassis 6 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for video Muxlab Rackmount Balun Chassis 6