Muxlab VGA Balun User Manual

Browse online or download User Manual for Accessories for electrical Muxlab VGA Balun. Muxlab VGA Balun User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
© MuxLab Inc. 94-000281-F SE-000201-F
Specifications
Environment
VGA. VESA VP&D 1.0, VIP ver 2.0
Devices
VGA monitors, laptops, LCD projection screens, PCs
Transmission
Transparent to the user
Bandwidth
DC to 60 MHz
Input Signals
Video: 1.1 Vp-p. Horiz & Vert Sync: TTL standard. 300kHz max.
bandwidth
Insertion Loss
Less than 3 dB per pair over the frequency range
Common Mode Rejection Ratio
(CMRR)
15 kHz -60 dB max.
100 kHz to 10 MHz -40 dB max.
100 MHz -20 dB max.
Video Signal Return Loss
-15 dB max from DC to 60 MHz
Video Differential Gain
±2%
Video Differential Phase
±2%
Connectors
RJ45 shielded
500010: DB15 HD Plug & 6” lead (connects to VGA output of PC)
500011: DB15 HD Receptacle (connects to VGA input of monitor)
500014: DB15 HD Plug & 6” lead (connects to VGA input of monitor)
Max. Distance via
Cat 5E/6 UTP/STP Cable
640x480 pixels (15 MHz): 450 ft (137 m)
800x600 pixels (30 MHz): 350 ft (107 m)
1024x768 pixels (60 MHz): 250 ft (76 m)
1280x1024 pixels (100 MHz): 200 ft (61 m)
RJ45 Pin Configuration
Reverse Polarity Sensitive
R Video (Red) Pin 1 (+) Pin 2 (-) balanced
G Video (Green) Pin 4 (+) Pin 5 (-) balanced
B Video (Blue) Pin 7 (+) Pin 8 (-) balanced
Horiz Sync Pin 3
Vert Sync Pin 6
Horiz. & Vert Sync Return: STP cable: Shield. UTP cable: NC
+5 VDC Not connected
ID0 Not connected
SDA Not connected
SCL Not connected
Cable In order to ensure a common signal ground between the VGA Baluns,
shielded Cat 5E/6 twisted pair (STP) cable terminated on shielded RJ45
plugs at both ends is highly recommended.
Impedance
Input: RGB 75 ohms (DB15 HD) unbalanced
Output: RGB 100 ohms (RJ45 shielded) balanced
Temperature
Operating: 0° to 55°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure
ABS fire retardant plastic
Dimensions
2.40” x 2.25 x 1.00” (6.10 x 5.72 x 2.54 cm)
Mounting
Freestanding. Separate Velcro mounting pad included
Warranty
Lifetime
Order Information
500010 VGA Balun, PC Side, DB15 HD Plug
500011 VGA Balun, Monitor Side, DB15 HD Receptacle
500014 VGA Balun, Monitor Side, DB15 HD Plug
VGA Balun
500010, 500011 & 500014
Quick Installation Guide
Overview
The VGA Balun allows VGA video signals to be transmitted up to 450 ft (137 m) via a 4-pair Cat
5E/6 twisted pair cable for more cost-effective and versatile cabling. Used in pairs, the VGA Balun
eliminates costly and bulky VGA cables, enabling VGA monitors to be connected at extended
distances from the PC via standard Cat 5E/6 twisted pair cable. Used in pairs, one VGA Balun
(500010) connects to the VGA source (i.e. output) and one VGA Balun (500011 or 500014)
connects to the VGA destination (i.e. monitor input). The VGA Balun transmits the RGB video,
horizontal and vertical synchronization pulses. Since the VGA Balun is a passive device and uses
only 8 wires, it does not support VGA handshaking/control signals.
In order to ensure reliable signal continuity between the equipment, it is recommended to use
shielded twisted pair (STP) cable terminated with shielded RJ45 connectors.
Applications
The VGA Balun allows pre-existing twisted pair cable to be used in such applications as classroom
video distribution, overhead projector systems, PC-training systems, and tradeshow PC-demo
systems.
Page view 0
1 2

Summary of Contents

Page 1 - Specifications

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: vid

Page 2 - Application Tips

© MuxLab Inc.InstallationTo install the VGA Balun, perform the following steps:Caution: Do not attempt to open the housing. There are no user-servicea

Comments to this Manuals

No comments