Muxlab HD CCTV Pass-Thru Balun with Cable Leads User Manual

Browse online or download User Manual for Accessories for electrical Muxlab HD CCTV Pass-Thru Balun with Cable Leads. Muxlab HD CCTV Pass-Thru Balun with Cable Leads User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
© MuxLab Inc. 94-000754-A
8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: videoease@muxlab.com URL: www.muxlab.com
Specifications
Environment
HD CCTV, HD-SDI
Device Targeted
HD-SDI (up to 1080i) CCTV equipment that need to bring power
and control using a single UTP cable.
Compatible RX Unit
500720, 500720-CL, 500721
Signal Transmission
Signal: SDI (no analog),
Power: 12VDC or 24VAC 2A max,
Control signal: any signal using a balanced pair, 1A max.
Cabling Requirement
Any 4-pair straight cable Cat5e or 6, 24 AWG or lower.
Connectors and cables
One 75 ohm cable with a male BNC connector.
Two pairs of wire for power and signal.
RJ45 Pin Configuration
Pin 7-8 for SDI signal
Pin 1+3, 2+6 for power (1&3 in parallel, 2&6 in parallel)
Pin 4-5 for control
Maximum distance
When used with 500721:
SD: 150m (500ft) for CAT 5E UTP,
150m (500ft) for CAT 6 UTP.
HD (720p, 1080i): 45m (150ft) using Cat 5E UTP,
45m (150ft) for CAT 6 UTP.
When used with another 500720-CL or 500720:
SD: 120m (400ft) for CAT 5E UTP,
150m (500ft) for CAT 6 UTP.
HD (720p, 1080i): 30m (100ft) using Cat 5E UTP,
35m (120ft) for CAT 6 UTP.
This balun will not work in 3G (1080p).
Note: Maximum distance is function of the receiving equipment.
Dedicated Cat5E/6 cables are recommended with no patch panels
Temperature
Operating: -40° to 60°C (-40° to 140°F)
Storage: -40° to 85°C (-40° to 185°F)
Humidity
Maximum 95% (non-condensing)
Enclosure
Cast Aluminum
Dimensions
2 x 2.6 x 4.7 cm (0.8” x 1.85” x 1.05”) excluding cables.
Weight
60g (2 oz.)
Warranty
Lifetime
Order Information
500720-CL HD CCTV Pass-Thru Balun with Cable Leads
HD CCTV Pass-Thru Balun
500720-CL
Quick Installation Guide
Overview
The HD CCTV Pass-Thru Balun with Cable Leads (500720-CL) allows one HD CCTV
(HD-SDI) video channel to be transmitted along with remote power and PTZ control via
a Cat5E or Cat6 cable at HD resolution (720p, 1080i) in a point-to-point configuration.
The 500720-CL supports transmission of SDI digital video (including embedded Audio
and/or Time Code) within facilities and between video equipment. The product is used
in conjunction with another 500720-CL or 500720 or in conjunction with the 500721
for greater distance.
Applications
HD-CCTV surveillance system
Page view 0
1 2

Summary of Contents

Page 1 - Specifications

© MuxLab Inc. 94-000754-A 8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5 Tel: (514) 905-0588 Fax: (514) 905-0589 Toll Free (North America):

Page 2 - Troubleshooting

© MuxLab Inc. 2014 Installation Identify the baluns to be installed. The 500720-CL is installed at the camera side and either the 500720 or 500721

Comments to this Manuals

No comments